The Warrior is our most popular camera model. It is tied with the Deputy in terms of how easy it is to install and position, since neither camera requires you to remove any part of the camera to screw it into the wall/ceiling/soffit. This makes it ideal for outdoor use as you don't have a tendency to trap moisture in the lens, as is common with dome cameras, where you have to remove the outer glass dome to mount them. The 81 degree lens is great balance between covering a large area and identifying faces and license plates. Although you can use this camera inside or out, the most common use of the Warrior models (the camera comes in 2MP, 4MP, or 8MP) is to cover the side of buildings or large sections of yards.
Specifications-26BF2
Image Sensor-1/2.7” 2 Million Pixel, Progressive Scan CMOS
Processor Manufacturer-Hisilicon
Min. Illumination-Color video possible until 0.02 lux @F1.8, AGC ON | 0 lux with IR on
Shutter-Auto/Manual, 1/6 to 1/100,000 second
Lens-4.0mm@F2.0, angle of view | 84.8° of horizontal coverage; (47.7° vertical)
Day & Night-IR-cut filter with auto switch (ICR)
Digital Noise Reduction -2D/3D DNR
Signal to Noise Ratio->52dB
Wide Dynamic Range-Digital WDR
Digital Defog-Yes
Video Compression-H.265, H.264, MJPEG
Camera Streams-Main Stream: up to 2MP (1920×1080): Max. 30 fps;
Sub Stream: up to 2MP (1920×1080): Max. 30 fps;
Mobile Data-Sensitive Stream: up to D1 (720×576): Max. 30 fps
Bit Rate-32 Kbps ~ 8Mbps
Max. Image Resolution-1920x1080, 2 Megapixel
Frame Rate-1080P (1920*1080): Max. 30 fps; 720P (1280*720): Max. 30 fps; D1 (720*576): Max. 30 fps
Image Settings-Saturation, brightness, contrast, sharpness, headlight compensation, backlight compensation, region of interest, 9:16 corridor mode, evaluative metering.
BLC-Yes, zone configurable
Alarm Trigger-Motion detection, tampering alarm, network disconnect, IP address conflict, storage exception
Protocols-IPv4, IGMP, ICMP, ARP, TCP, UDP, DHCP, PPPoE, RTP, RTSP, RTCP, DNS, DDNS, NTP, FTP, UPnP, HTTP, HTTPS, SMTP, 802.1x, SNMP
Interoperability-ONVIF (Profile S, Profile T)
Communication Interface-1 RJ45 10M/100M Base-TX Ethernet
Operating Conditions-(-31°F ~ 140 °F) Humidity 10 - 95% (non-condensing)
Power Supply-12 V DC±25%, PoE (IEEE802.3 af)
Power Consumption-Max. 6.4W
Weather Proof Rating-IP67
Dimensions-6.2” × 2.5” × 2.5”
IR Range-Up to 100ft.
Weight-1 Lbs